• Updated DIY Hat Platen


    A few weeks ago I posted about experimenting with building a hat platen after transfers were failing me. Here’s an updated on a new more versatile design that allows you to burn around 8 designs per 20″x24″ screen. These were printed using a standard aluminum frame 200 mesh screen with water based ink and low […]

  • DIY
  • How to screen print foil


    Recently I did a job that required gold foil and, since I had never done it before, I decided to add a quick how to. This is how I print foil, I’m sure there are other ways that work just as good. Materials Gold Foil Plastisol Foil Adhesive Process 156 mesh, 3mm off contact Canvas […]